HPB_bot2_i486.so, HPBot2 ver 0.5 release 106 Options

[bir3yk]

I compiled a linux RCBot2 0.5

1. Folder Structure :
.../hl2
.../orangebox <-- srcds_run is here (for TF2 and Orange-Box games)
.../orangebox/bin <-- HPB_bot2_i486.so files copied here
.../rcbot2/
.../rcbot2/config/
.../rcbot2/profiles/
.../rcbot2/waypoints/
.../rcbot2/waypoints/orangebox/tf/ <-- waypoint and scripts files copied here
.../steam
2. Edit .../rcbot2/config/bot_mods.ini
mod = TF2
steamdir = orangebox
gamedir = tf
bot = TF2
3. Add
./srcds_run ..............+plugin_load ../bin/HPB_bot2


146 SVN revisions 119 SVN revisions
RCbot2 0.52
121 SVN revisions 121 SVN revisions
RCbot2 0.53
122 SVN revisions 122 SVN revisions

124 SVN revisions 124 SVN revisions

126 SVN revisions 126 SVN revisions

146 SVN revisions 146 SVN revisions

[bir3yk]

Makefile

CODE

#
# SDK Makefile for x86 Linux
#
#

#############################################################################
# Developer configurable items
#############################################################################

# the name of the mod binary (_i486.so is appended to the end)
#NAME=server
NAME=HPB_bot2

# the location of the vcproj that builds the mod
#MOD_PROJ=../game/server/server_hl2mp-2005.vcproj
MOD_PROJ=../utils/RCBot2/HPB_Bot2.vcproj

# the name of the mod configuration (typically <proj name>_<build type><build target>)
#MOD_CONFIG=ServerHL2MP_ReleaseWin32
MOD_CONFIG=HPB_bot2_ReleaseWin32

# the directory the base binaries (tier0_i486.so, etc) are located
# this should point to your orange box subfolder of where you have srcds installed.
#GAME_DIR=~/srcds/orangebox
GAME_DIR=/home/hlds/steam/orangebox

# the path to your mods directory
# set this so that 'make install' or 'make installrelease' will copy your binary over automatically.
#MOD_DIR=$(GAME_DIR)/SampleMod
MOD_DIR=$(GAME_DIR)/

# compiler options (gcc 3.4.1 will work - 4.2.2 recommended)
#CC=/usr/local/bin/gcc
#CPLUS=/usr/local/bin/g++
#CLINK=/usr/local/bin/gcc
#CPP_LIB="/usr/local/lib/libstdc++.a /usr/local/lib/gcc/i686-pc-linux-gnu/4.2.2/libgcc_eh.a"
#CC=/usr/bin/gcc
#CPLUS=/usr/bin/g++-4.1
#CLINK=/usr/bin/gcc-4.1
CPP_LIB=" /usr/lib/gcc/i486-linux-gnu/4.1.3/libstdc++.a /usr/lib/gcc/i486-linux-gnu/4.1.3/libgcc_eh.a"
CC = /usr/bin/gcc-4.1
CPLUS = /usr/bin/g++-4.1
CLINK = /usr/bin/gcc-4.1
#CPP_LIB = "libstdc++.a libgcc_eh.a"


# GCC 4.2.2 optimization flags, if you're using anything below, don't use these!
#OPTFLAGS=-O1 -fomit-frame-pointer -ffast-math -fforce-addr -funroll-loops -fthread-jumps -fcrossjumping -foptimize-sibling-calls -fcse-follow-jumps -fcse-skip-blocks -fgcse -fgcse-lm -fexpensive-optimizations -frerun-cse-after-loop -fcaller-saves -fpeephole2 -fschedule-insns2 -fsched-interblock -fsched-spec -fregmove -fstrict-overflow -fdelete-null-pointer-checks -freorder-blocks -freorder-functions -falign-functions -falign-jumps -falign-loops -falign-labels -ftree-vrp -ftree-pre -finline-functions -funswitch-loops -fgcse-after-reload
OPTFLAGS=-O1 -fomit-frame-pointer -ffast-math -fforce-addr -funroll-loops -fthread-jumps -fcrossjumping -foptimize-sibling-calls -fcse-follow-jumps -fcse-skip-blocks -fgcse -fgcse-lm -fexpensive-optimizations -frerun-cse-after-loop -fcaller-saves -fpeephole2 -fschedule-insns2 -fsched-interblock -fsched-spec -fregmove -fdelete-null-pointer-checks -freorder-blocks -freorder-functions -falign-functions -falign-jumps -falign-loops -falign-labels -ftree-vrp -ftree-pre -finline-functions -funswitch-loops -fgcse-after-reload

#OPTFLAGS=

# put any compiler flags you want passed here
USER_CFLAGS=

# Link Libraries
#LIBFILES= \
#  $(LIB_DIR)/lib/linux/tier1_486.a \
#  $(LIB_DIR)/lib/linux/choreoobjects_486.a \
#  $(LIB_DIR)/lib/linux/particles_486.a \
#  $(LIB_DIR)/lib/linux/dmxloader_486.a \
#  libtier0.so \
#  libvstdlib.so \
#  libsteam_api.so \
#  $(LIB_DIR)/lib/linux/tier3_486.a \
#  $(LIB_DIR)/lib/linux/tier2_486.a \
#  $(LIB_DIR)/lib/linux/tier1_486.a \
#  $(LIB_DIR)/lib/linux/mathlib_486.a \


# link flags for your mod, make sure to include any special libraries here
#NOTE: YES we want to include the lib files 2 times. We've run into problems with the 1-pass linker not bringing in symbols it should.
#LDFLAGS="-lm -ldl $(LIBFILES) $(LIBFILES)"
LIB_DIR = $(SOURCE_DIR)/lib/linux
LDFLAGS = "-lm -ldl  $(LIB_DIR)/mathlib_i486.a libtier0.so libvstdlib.so  $(LIB_DIR)/tier1_i486.a $(LIB_DIR)/tier2_i486.a $(LIB_DIR)/tier3_i486.a "

# XERCES 2.6.0 or above ( [url=http://xml.apache.org/xerces-c/]http://xml.apache.org/xerces-c/[/url] ) is used by the vcproj to makefile converter
# it must be installed before being able to run this makefile
# if you have xerces installed already you should be able to use the two lines below
#XERCES_INC_DIR=/usr/include
#XERCES_LIB_DIR=/usr/lib
XERCES_INC_DIR=/opt/include
XERCES_LIB_DIR=/opt/lib

#############################################################################
# Things below here shouldn't need to be altered
#############################################################################
MAKE=make

# the dir we want to put binaries we build into
BUILD_DIR=.
# the place to put object files
BUILD_OBJ_DIR=$(BUILD_DIR)/obj

# the location of the source code
SOURCE_DIR=..

# the CPU target for the build, must be i486 for now
ARCH=i486
ARCH_CFLAGS=-mtune=i686 -march=pentium -mmmx -msse -pipe

# -fpermissive is so gcc 3.4.x doesn't complain about some template stuff
BASE_CFLAGS=-DVPROF_LEVEL=1 -DSWDS -D_LINUX -DLINUX -DNDEBUG -fpermissive -Dstricmp=strcasecmp -D_stricmp=strcasecmp -D_strnicmp=strncasecmp -Dstrnicmp=strncasecmp -D_snprintf=snprintf -D_vsnprintf=vsnprintf -D_alloca=alloca -Dstrcmpi=strcasecmp

SHLIBEXT=so

SHLIBCFLAGS=-fPIC
SHLIBLDFLAGS=-shared -Wl,-Map,$@_map.txt -Wl

#flags passed to the compiler
CFLAGS="$(USER_CFLAGS) $(DEFINES) $(ARCH_CFLAGS) $(OPTFLAGS) $(BASE_CFLAGS) -Usprintf=use_Q_snprintf_instead_of_sprintf -Ustrncpy=use_Q_strncpy_instead -Ufopen=dont_use_fopen -UPROTECTED_THINGS_ENABLE"

# define list passed to make for the sub makefile
BASE_DEFINES=CC=$(CC) CPLUS=$(CPLUS) CPP_LIB=$(CPP_LIB) \
    BUILD_DIR=$(BUILD_DIR) BUILD_OBJ_DIR=$(BUILD_OBJ_DIR) \
    SOURCE_DIR=$(SOURCE_DIR) SHLIBLDFLAGS=$(SHLIBLDFLAGS) SHLIBEXT=$(SHLIBEXT) \
    CLINK=$(CLINK) CFLAGS=$(CFLAGS) LDFLAGS=$(LDFLAGS) \
    ARCH=$(ARCH) GAME_DIR=$(GAME_DIR) MOD_CONFIG=$(MOD_CONFIG) NAME=$(NAME) \
    XERCES_INC_DIR=$(XERCES_INC_DIR) XERCES_LIB_DIR=$(XERCES_LIB_DIR)

# Project Makefile
MAKE_MOD=Makefile.server
MAKE_VCPM=Makefile.vcpm
MAKE_PLUGIN=Makefile.plugin

all: check vcpm server

check:
    if [ -z "$(CC)" ]; then echo "Compiler not defined."; exit; fi
    if [ ! -d $(BUILD_DIR) ];then mkdir $(BUILD_DIR);fi
    cd $(BUILD_DIR)

vcpm:
    $(MAKE) -f $(MAKE_VCPM) $(BASE_DEFINES)

server: vcpm
    if [ ! -f "libtier0.so" ]; then ln -s $(GAME_DIR)/bin/libtier0.so .; fi
    if [ ! -f "libvstdlib.so" ]; then ln -s $(GAME_DIR)/bin/libvstdlib.so .; fi
#    if [ ! -f "libsteam_api.so" ]; then ln -s $(GAME_DIR)/bin/libsteam_api.so .; fi
# When running over samba we need to copy the files because symlinking isn't possible.
#    cp -f $(GAME_DIR)/bin/tier0_i486.so .
#    cp -f $(GAME_DIR)/bin/vstdlib_i486.so .
#    cp -f $(GAME_DIR)/bin/steam_api_i486.so .

    ./vcpm $(MOD_PROJ)
    $(MAKE) -f $(MAKE_MOD) $(BASE_DEFINES)

plugin:
    $(MAKE) -f $(MAKE_PLUGIN) $(BASE_DEFINES)

clean:
     $(MAKE) -f $(MAKE_VCPM) $(BASE_DEFINES) clean
     $(MAKE) -f $(MAKE_PLUGIN) $(BASE_DEFINES) clean
     $(MAKE) -f $(MAKE_MOD) $(BASE_DEFINES) clean

install:
    cp -f $(NAME)_$(ARCH).so $(MOD_DIR)/bin/$(NAME)_$(ARCH).so

installrelease:
    cp -f $(NAME)_$(ARCH).so $(MOD_DIR)/bin/$(NAME)_$(ARCH).so
    strip $(MOD_DIR)/bin/$(NAME)_$(ARCH).so

[xomp]

Makefile

CODE

#
# SDK Makefile for x86 Linux
#
#

#############################################################################
# Developer configurable items
#############################################################################

# the name of the mod binary (_i486.so is appended to the end)
#NAME=server
NAME=HPB_bot2

# the location of the vcproj that builds the mod
#MOD_PROJ=../game/server/server_hl2mp-2005.vcproj
MOD_PROJ=../utils/RCBot2/HPB_Bot2.vcproj

# the name of the mod configuration (typically <proj name>_<build type><build target>)
#MOD_CONFIG=ServerHL2MP_ReleaseWin32
MOD_CONFIG=HPB_bot2_ReleaseWin32

# the directory the base binaries (tier0_i486.so, etc) are located
# this should point to your orange box subfolder of where you have srcds installed.
#GAME_DIR=~/srcds/orangebox
GAME_DIR=/home/hlds/steam/orangebox

# the path to your mods directory
# set this so that 'make install' or 'make installrelease' will copy your binary over automatically.
#MOD_DIR=$(GAME_DIR)/SampleMod
MOD_DIR=$(GAME_DIR)/

# compiler options (gcc 3.4.1 will work - 4.2.2 recommended)
#CC=/usr/local/bin/gcc
#CPLUS=/usr/local/bin/g++
#CLINK=/usr/local/bin/gcc
#CPP_LIB="/usr/local/lib/libstdc++.a /usr/local/lib/gcc/i686-pc-linux-gnu/4.2.2/libgcc_eh.a"
#CC=/usr/bin/gcc
#CPLUS=/usr/bin/g++-4.1
#CLINK=/usr/bin/gcc-4.1
CPP_LIB=" /usr/lib/gcc/i486-linux-gnu/4.1.3/libstdc++.a /usr/lib/gcc/i486-linux-gnu/4.1.3/libgcc_eh.a"
CC = /usr/bin/gcc-4.1
CPLUS = /usr/bin/g++-4.1
CLINK = /usr/bin/gcc-4.1
#CPP_LIB = "libstdc++.a libgcc_eh.a"
# GCC 4.2.2 optimization flags, if you're using anything below, don't use these!
#OPTFLAGS=-O1 -fomit-frame-pointer -ffast-math -fforce-addr -funroll-loops -fthread-jumps -fcrossjumping -foptimize-sibling-calls -fcse-follow-jumps -fcse-skip-blocks -fgcse -fgcse-lm -fexpensive-optimizations -frerun-cse-after-loop -fcaller-saves -fpeephole2 -fschedule-insns2 -fsched-interblock -fsched-spec -fregmove -fstrict-overflow -fdelete-null-pointer-checks -freorder-blocks -freorder-functions -falign-functions -falign-jumps -falign-loops -falign-labels -ftree-vrp -ftree-pre -finline-functions -funswitch-loops -fgcse-after-reload
OPTFLAGS=-O1 -fomit-frame-pointer -ffast-math -fforce-addr -funroll-loops -fthread-jumps -fcrossjumping -foptimize-sibling-calls -fcse-follow-jumps -fcse-skip-blocks -fgcse -fgcse-lm -fexpensive-optimizations -frerun-cse-after-loop -fcaller-saves -fpeephole2 -fschedule-insns2 -fsched-interblock -fsched-spec -fregmove -fdelete-null-pointer-checks -freorder-blocks -freorder-functions -falign-functions -falign-jumps -falign-loops -falign-labels -ftree-vrp -ftree-pre -finline-functions -funswitch-loops -fgcse-after-reload

#OPTFLAGS=

# put any compiler flags you want passed here
USER_CFLAGS=

# Link Libraries
#LIBFILES= \
#  $(LIB_DIR)/lib/linux/tier1_486.a \
#  $(LIB_DIR)/lib/linux/choreoobjects_486.a \
#  $(LIB_DIR)/lib/linux/particles_486.a \
#  $(LIB_DIR)/lib/linux/dmxloader_486.a \
#  libtier0.so \
#  libvstdlib.so \
#  libsteam_api.so \
#  $(LIB_DIR)/lib/linux/tier3_486.a \
#  $(LIB_DIR)/lib/linux/tier2_486.a \
#  $(LIB_DIR)/lib/linux/tier1_486.a \
#  $(LIB_DIR)/lib/linux/mathlib_486.a \
# link flags for your mod, make sure to include any special libraries here
#NOTE: YES we want to include the lib files 2 times. We've run into problems with the 1-pass linker not bringing in symbols it should.
#LDFLAGS="-lm -ldl $(LIBFILES) $(LIBFILES)"
LIB_DIR = $(SOURCE_DIR)/lib/linux
LDFLAGS = "-lm -ldl  $(LIB_DIR)/mathlib_i486.a libtier0.so libvstdlib.so  $(LIB_DIR)/tier1_i486.a $(LIB_DIR)/tier2_i486.a $(LIB_DIR)/tier3_i486.a "

# XERCES 2.6.0 or above ( [url=http://xml.apache.org/xerces-c/]http://xml.apache.org/xerces-c/[/url] ) is used by the vcproj to makefile converter
# it must be installed before being able to run this makefile
# if you have xerces installed already you should be able to use the two lines below
#XERCES_INC_DIR=/usr/include
#XERCES_LIB_DIR=/usr/lib
XERCES_INC_DIR=/opt/include
XERCES_LIB_DIR=/opt/lib

#############################################################################
# Things below here shouldn't need to be altered
#############################################################################
MAKE=make

# the dir we want to put binaries we build into
BUILD_DIR=.
# the place to put object files
BUILD_OBJ_DIR=$(BUILD_DIR)/obj

# the location of the source code
SOURCE_DIR=..

# the CPU target for the build, must be i486 for now
ARCH=i486
ARCH_CFLAGS=-mtune=i686 -march=pentium -mmmx -msse -pipe

# -fpermissive is so gcc 3.4.x doesn't complain about some template stuff
BASE_CFLAGS=-DVPROF_LEVEL=1 -DSWDS -D_LINUX -DLINUX -DNDEBUG -fpermissive -Dstricmp=strcasecmp -D_stricmp=strcasecmp -D_strnicmp=strncasecmp -Dstrnicmp=strncasecmp -D_snprintf=snprintf -D_vsnprintf=vsnprintf -D_alloca=alloca -Dstrcmpi=strcasecmp

SHLIBEXT=so

SHLIBCFLAGS=-fPIC
SHLIBLDFLAGS=-shared -Wl,-Map,$@_map.txt -Wl

#flags passed to the compiler
CFLAGS="$(USER_CFLAGS) $(DEFINES) $(ARCH_CFLAGS) $(OPTFLAGS) $(BASE_CFLAGS) -Usprintf=use_Q_snprintf_instead_of_sprintf -Ustrncpy=use_Q_strncpy_instead -Ufopen=dont_use_fopen -UPROTECTED_THINGS_ENABLE"

# define list passed to make for the sub makefile
BASE_DEFINES=CC=$(CC) CPLUS=$(CPLUS) CPP_LIB=$(CPP_LIB) \
    BUILD_DIR=$(BUILD_DIR) BUILD_OBJ_DIR=$(BUILD_OBJ_DIR) \
    SOURCE_DIR=$(SOURCE_DIR) SHLIBLDFLAGS=$(SHLIBLDFLAGS) SHLIBEXT=$(SHLIBEXT) \
    CLINK=$(CLINK) CFLAGS=$(CFLAGS) LDFLAGS=$(LDFLAGS) \
    ARCH=$(ARCH) GAME_DIR=$(GAME_DIR) MOD_CONFIG=$(MOD_CONFIG) NAME=$(NAME) \
    XERCES_INC_DIR=$(XERCES_INC_DIR) XERCES_LIB_DIR=$(XERCES_LIB_DIR)

# Project Makefile
MAKE_MOD=Makefile.server
MAKE_VCPM=Makefile.vcpm
MAKE_PLUGIN=Makefile.plugin

all: check vcpm server

check:
    if [ -z "$(CC)" ]; then echo "Compiler not defined."; exit; fi
    if [ ! -d $(BUILD_DIR) ];then mkdir $(BUILD_DIR);fi
    cd $(BUILD_DIR)

vcpm:
    $(MAKE) -f $(MAKE_VCPM) $(BASE_DEFINES)

server: vcpm
    if [ ! -f "libtier0.so" ]; then ln -s $(GAME_DIR)/bin/libtier0.so .; fi
    if [ ! -f "libvstdlib.so" ]; then ln -s $(GAME_DIR)/bin/libvstdlib.so .; fi
#    if [ ! -f "libsteam_api.so" ]; then ln -s $(GAME_DIR)/bin/libsteam_api.so .; fi
# When running over samba we need to copy the files because symlinking isn't possible.
#    cp -f $(GAME_DIR)/bin/tier0_i486.so .
#    cp -f $(GAME_DIR)/bin/vstdlib_i486.so .
#    cp -f $(GAME_DIR)/bin/steam_api_i486.so .

    ./vcpm $(MOD_PROJ)
    $(MAKE) -f $(MAKE_MOD) $(BASE_DEFINES)

plugin:
    $(MAKE) -f $(MAKE_PLUGIN) $(BASE_DEFINES)

clean:
     $(MAKE) -f $(MAKE_VCPM) $(BASE_DEFINES) clean
     $(MAKE) -f $(MAKE_PLUGIN) $(BASE_DEFINES) clean
     $(MAKE) -f $(MAKE_MOD) $(BASE_DEFINES) clean

install:
    cp -f $(NAME)_$(ARCH).so $(MOD_DIR)/bin/$(NAME)_$(ARCH).so

installrelease:
    cp -f $(NAME)_$(ARCH).so $(MOD_DIR)/bin/$(NAME)_$(ARCH).so
    strip $(MOD_DIR)/bin/$(NAME)_$(ARCH).so

YAY A MAKEFILE FOR LINUX!!!