Lift button, well.. Options

[[ASA]ODEN]

I try to make waypoints and paths through the Marines first lift on ns_hera (but question is generic )

Situation:
I start with a normal WP (Blue) and a LiftButton WP (Red) in front of the lift button (x) from which I put a one-way path to a Wait-For-Lift WP (White) on the elevator.

Impressive graphics:
B---R-x------W

Result:
Still, bots don't push the button - merely waits specified 10 secs and jumps out getting hurt (poor bot )

Q: How is the "red" WP supposed to be used?

(Tried with normal blue and seen bot push the button once or twice (out of hundreds of tests , this since bots push the door button at a blue waypoints)

regards
Oden

[Cheeseh]

if there are lift buttons dont use any wait for lift waypoints for a start (These are mainly for lifts that just move around on their own..) This is because if the bot finds a lift button waypoint it will look for a button near it and press it then wait for the lift when it presses it.

And put the lift button waypoint near the lift and near the button. It doesnt need to be right next to the button, it just needs to be visible from the lift button waypoint and make sure it is near the lift too.